Back to all

A hint of Halloween 🦇🕸🕷

A hint of Halloween 🦇🕸🕷

Baby bib with HTV Glitter

Items needed:
Baby bib
Xpres Craft HTV Glitter in black 
Heat press or Iron 
Silhouette Cameo Machine 
Cutting mat if using off cuts
Design ID: 155029

Measure the front of the bib. This will depend on the size and shape of the bib so each project is likely to be a different size.

Top Tip: a good visual way to do this is to lay your mat over the bib to see how many squares work best, the squares on the mat are in inches so this makes for easy measuring.

Open up Silhouette Studio and open up the design.


Mirror your design horizontally as Heat transfer Vinyl or HTV needs to be cut on the reverse.

Cut the design from the HTV on the Silhouette Cameo.

For cut settings on all our materials you can download a help sheet here.

Weed away the excess HTV from the outside in, so you are left with just the design you want to transfer on to the bib.

Place your bib onto either a flat surface if using an iron or onto the bed of your heat press, position your design onto the bib with the plastic carrier sheet on the HTV facing up. Press according to settings for the brand of HTV you are using – we used HTV glitter and the A4 heat press.

Peel away the clear carrier sheet, Our HTV Glitter is warm peel. Remove shortly after opening the press, the carrier sheet should peel away easily.



Leave your comment Close